Main technical parameters: 
 1, uses: a variety of bare copper or tinned copper wire, copper clad steel, copper clad aluminum alloy wire, etc., or concentric stranded Stranded; 
 2, the pay-off: single line of the first passive release 
 3, to the wire diameter: φ0.035 ~ φ2.5mm 
 4, the twisted cross-section area: 0.035 ~ 2.5mmsq 
 5 Take-ray disc: MAX DIN500 
 6, maximum wire speed: 3000rpm/6000TPM; 
 7, the drive motor: 7.5KWAC 
 8, twisted away from the range: 4.22 ~ 39.64mm (Standard 28 are above) 
 9, the upper and lower axis: manual hydraulic lift. 
 10, cable ways: rod screw cable, row width, row spacing can be adjusted. 
 11, Noise: ≤ 85dB (A) 
 12, Take-up tension control: magnetic clutch (new) 256 automatically controlled to maintain an empty collection plate to the tension over the same disk 
 13, Brake: electromagnetic brakes, inside and outside the break, breaking stock automatic braking control. 
 14, Device Center High: 750mm 
 15, twisted bow: After balancing test of the steel arch in the high-speed rotating cutter minimal vibration, and the use of ceramic porcelain eyes over the line for the balance of 
 16, bearing cooling Lubrication: by oil tank with oil lubrication. More suitable for high-speed operation. 
 17, Traction: traction wheels by changing the initiative to change the pitch length, no open-gear drive, all through the timing belt drive transmission. Chrome plated wheel traction to extend the service life. 
 18, twisted direction: left or right (S or Z) set free. 
 19, Dimension: L2500 * W1200 * 1300mm 
 20, Weight: about 2200KG 
 B, mechanical form performance analysis: 
 1, the body structure: 
 1-1, Material: SS41 
 1-2, the structure: the body formed by the noodle soldering iron, annealed to remove stress and then by precision boring machine, one of the reaming completed. 
 2 axes: 
 2-1, material: # 45 steel 
 2-2, Accuracy: axis quenched HPC25 ~ 27, to ensure the elimination of internal stress, improve the rigidity, with the Department have been ground to ensure concentricity and roundness and balance. 
 3, the take-up shaft dimensions: diameter 500mmφ Unit: mm 
 Outside diameter (OD) Diameter (ID) Outer width (OW) in width (IW) aperture 
 50021831029070 
 4, cable systems: 
 4-1, bearing type cable, cable stability, fast response 
 4-2, row width, row spacing adjustable 
 5, under the axis of coiling axis devices: 
 5-1, the top needle fixed spool shaft, a hydraulic elevator shaft for the spool up and down 
 5-2, full safety cover closed, the pressure has a transparent window to observe the situation and cable coiling 
 6, Power: Main Motor: 7.5KW AC inverter control Madagascar 
 7, disconnection control: contact mode, internal and external disconnection control 
 8, the brake control: electromagnetic brakes, automatic brake internal and external disconnection 
 9, the operation box: 
 9-1, the digital-type wire-speed table 
 9-2, five-digit electronic counter 
 9-3, wire-speed adjustment VR 
 9-4, power supply, micro switch broken light 
 9-5, jog, count to zero push button switch 
 9-6, internal and external disconnection ON, OFF selector switch 
 9-7, the strength of internal and external brake adjuster 
 10, electrical control box 
 10-1, the power switch 
 10-2, the drive control system 
 10-3, broken brake control