Automatically into the circle drive 
 This machine is suitable for 0.5-6mm wires and cables into a ring of small cross section and the bar fight. Compared with traditional models of its main priorities the following features: 
 1, production efficiency: 
 A: automatic cable, one person operation; 
 B: Take-up rate is the traditional model into a circle 2-3 times; 
 C: Quick play bar device into the laps of the wire bundles in the machine table can be quickly and easily removed after, reducing the labor intensity; 
 D: wire into a circle, playing bar, plastic film packaging can be one of three processes operate independently. 
 2, cable quality, stability: 
 A: automatic cable, cable wire itself by stress, the use of scientific principles pulley combination, can guarantee the size of cable wire pitch and not be affected, the wire neat and beautiful. 
 B: automatic cable from human factors, cable quality and stability. Main technical parameters: 
 Put-line: from the pay-off reel tension Size: "= 630mm 
 Cable: Auto cable host control: frequency control 
 Host Speed: 0-500 r / min wire bundle diameter: 120mm-200mm 
 Cable bundle diameter: "= 310mm line bundle thickness: 30-100mm 
 Cable tie slots: 3 slots per class output: about 700 bar (Class production) 
 Application: Suitable for 0.5-6mm cable wire and a small cross section bar into the ring and fight 
 Cable high-speed automatic rolling mill into a circle to play build up tension from the line planes, meter, quick to play bar device into a circle of three parts, with optional spark line detection and diameter measurement point and the diameter size of the spark . 
 1: build up tension line planes: 
 A: accumulator wire pay-off by using the tension remained stable. 
 B: Depending on the wire diameter. Tension of the springs and pulleys can be adjusted to. 
 C: (1) brake lever, (2) No shaft tapers down blocking of Chinese brake. Guide wheel arm down, put the greater the resistance line, when the host to set faster lap length of brake, turn the bottom position guide arm, put the greatest resistance to pay-off reel, reel for 1-2 seconds the brakes will not mess line. 
 D: use of (1) Handle (2) needle up and down the double top plate for quick and easy replacement of disk storage line, storage reels range from 0-630mm, optional 800mm. 
 2: E-meter devices: 
 A: one-way roller bearing, wire can only move forward not backward. 
 B: use of electronic counting sensor to improve the accuracy of meters. 
 C: Wheel of meters high temperature phosphating treatment, the use of imported PU roller rubber tire packages, high hardness, abrasion damage and wire are not to compressive deformation. 
 3: Quick bar into a circle to play host: 
 A: Automatic tension cable installation, cable speeds of up to 0 - 500 r / min, the freedom to choose, adjust, single-person operation. 
 B: Automatic Photo tray bar fight Rapid reduction in the 2-3 seconds to complete loading and unloading, into a ring tied directly in the machine table can be easily removed, the operation simple and convenient. 
 C: Automatic Photo shrinking fast after-hours bar fight tailgate position can be adjusted, to achieve 30-100mm into the ring to fight bar thickness. 
 D: Soft start variable frequency control and automatic braking technology, the drive started to accelerate within the set time program, boot speed too fast to avoid pulling the thin wire of local deformation. 
 Automatic cable tie machine into a circle to play the work of these steps: 
 1, cable ready, start into a circle 2, 3 automatic cable, 4 smart stop, manual tie lines 5, 6 unloading outside the tailgate, take line 7 
 E: E-meter dual-side device, the user may need to set the length of wire into a circle, and set the unit to the automatic alarm stop. 
 F: users can tester with optional spark diameter measurement device, when the wire diameter tolerance or surface Popi immediately when the alarm and automatically shut down.